top of page

WIMAG explained. Welsh Government funding for interim fire alarms

Nov 5
3 min read

If you own or manage a residential building in Wales that's waiting for fire safety remediation works, there's new funding that could make it safer for residents and cut the cost of waking watch.


WIMAG wales

The Welsh Government launched the Wales Interim Measures Alarm Grant (WIMAG) at the end of September 2026. Here's what it is, who can apply and how the process works.


What is WIMAG?


WIMAG is part of the Welsh Government's Building Safety Programme. It provides funding to install a common fire alarm system in eligible residential buildings as an interim safety measure while permanent remediation or mitigation works are carried out.


The aim is to keep residents safe in their homes and reduce reliance on waking watch.


Why it matters: the cost of waking watch


Waking watch means trained staff patrolling a building around the clock to raise the alarm if there's a fire. It's expensive, and in many buildings the cost lands on leaseholders.


When announcing the grant, Cabinet Minister Siân Gwenllian described it as a way to give leaseholders a route out of the spiralling costs of long-term waking watch. Where a fire risk assessor agrees a suitably designed common alarm system is an appropriate interim measure, it can take the place of waking watch altogether.


Which buildings qualify?


To be eligible, a building must be:

  • In Wales

  • 11 metres or taller

  • Multi-occupied and contain residential accommodation


You'll also need evidence that interim measures are needed, such as a current Fire Risk Assessment (FRA), a Fire Risk Appraisal of External Walls (FRAEW) or equivalent, and/or notices from the local fire and rescue service or local authority.


Who can apply?


Applications can be made by the building's responsible entity, registered social landlords, local authorities, or managing agents and other representatives authorised to act for them.


Leaseholders and residents can't apply directly. If you live in a building you think qualifies, raise it with your managing agent or building owner.


What does the grant cover?


Covered:

  • Fire alarm equipment: panels, detectors, wiring and similar

  • Labour and installation

  • Commissioning and testing

  • Irrecoverable VAT, where applicable

Not covered:

  • Waking watch costs (past, present or future)

  • Fire wardens or evacuation management staff

  • Project management, admin and legal fees

  • Maintenance or servicing contracts

  • Repairs to, removal of or conversion of existing alarm systems


The technical requirements


This isn't a job for just any electrician. Under the guidance, the system should:

  • Be designed to BS 5839-1, normally as a Category L5 system based on the building's fire safety needs

  • Meet the NFCC's simultaneous evacuation guidance

  • Be designed, installed and commissioned by a third-party accredited competent person


The grant can also fund a system that's capable of being upgraded later to a BS 8629 evacuation alert system. If that's likely to be your long-term solution, talk it through with your fire alarm engineer before the first installation.


How to apply


  1. Get fire safety advice supporting an interim fire alarm, usually through your fire risk assessment.

  2. Get quotes. The Welsh Government asks for three quotations for the installation.

  3. Submit your application and supporting evidence by email to WIMAG@gov.wales.

  4. Sign the grant award letter once your application is approved.

  5. Install and claim. Funding is paid after installation, on receipt of the commissioning certificate from your alarm installer and an updated FRA reflecting the new system.


Watch out for: if a new fire risk assessment or regulator identifies further measures after installation, you must tell WIMAG promptly and provide plans within 10 working days. Funding may have to be repaid if agreed works aren't completed on time, or if the building receives a prohibition notice within a year of the alarm being installed.


How Concept can help


Fire alarm engineer testing a smoke detector in a residential corridor

Concept Fire & Security designs, installs, commissions and maintains fire detection and alarm systems for residential and commercial buildings across Cardiff and South Wales. If you're applying for WIMAG, we can:


  • Survey your building and provide a detailed quotation for your application

  • Design a system to BS 5839-1 that meets the grant requirements, with an upgrade path to BS 8629 if you need one

  • Install and commission the system and provide the commissioning certificate you need to claim the funding

  • Keep the system serviced and maintained afterwards


The full guidance and application form are on GOV.WALES. Always check the latest version before you apply.


Think your building could qualify? Contact Concept for a survey and quotation.

Comments


Concept Fire and Security, Cardiff
bottom of page